Transform tap water into ultrapure water in the compact, fully automatic Thermo Scientific™ Barnstead™ Easypure™ RoDi water purification system. Automatic operation dispenses purified water on demand for a wide range of critical applications. It is easy to use and comes standard with a UV lamp, producing water with ultra low levels of organics. Features: Produces up to 15L/day of ultrapure water that exceeds Type 1 water specifications as per ASTM™ D1193, ISO 3696 and CLSI-CLRW Continuous water recirculation between reservoir, cartridges and UV lamp ensures consistent availability of highest purity water Microprocessor-controlled purity monitor provides a digital reading as the water exits the system Monitor alerts user to vital information including membrane performance and when to replace consumables 6.5L noncontaminating internal reservoir incorporates air filter to prevent stored water contamination Quiet pump provides optimal flowrates and silent operation Integral low-water and low-pressure pump protection ensures pump safety in the event there is insufficient water during storage Ordering Information: Optional accessories include External Boost Pump (1393583), Wall Mounting Bracket (1393585) and Pre-Filtration Accessory Kit (1393584). These and replacement consumables are sold separately. Contact your Sales Representative for details. Includes: Thermo Scientific™ Ventgard™ Reservoir Cap UV lamp Requires: Start-Up Kit (1393581) and Set of 3 Empty Cartridges (9828235CN; necessary for cleaning) to be ordered separately. Recommended for: HPLC ICP GC/MS AA
Barnstead™ Easypure™ RoDi
This item is no longer available and has been replaced by the next generation of Barnstead Water Purification Systems. The recommended replacement for this product is
Description
Additional information
| Bacterial retention |
99% |
|---|---|
| Certifications/Compliance |
ASTM™ D1193, ISO 3696 and CLSI-CLRW. CE, CSA |
| Conductivity |
0.055 µS/cm |
| Bacterial Content |
<1 CFU/mL |
| Daily Output |
Up to 15 L/Day |
| Feed Water Monitoring |
No |
| Feedwater Source |
Tap |
| Flow Rate |
0.8 L/min. |
| Product Water Type |
Type 1 |
| Resistivity |
18.2 Mohm.cm at 25°C |
| TOC Monitor with UV Intensity Monitoring |
No |
| Total Organic Carbon |
1 to 5 ppb |
| Type |
Water Purification System |
| Feedwater Pressure |
30 to 100 psig (2 to 6.9 bar) |
| Feedwater Temperature (Metric) |
4°C to 40°C |
| Particles >0.2µM/mL |
<1 μM/mL |
| Width (Metric) |
30.5 cm |
| Height (English) |
18 in. |
| Height (Metric) |
45.7 cm |
| Depth (English) |
19 in. |
| Depth (Metric) |
48.3 cm |
Reviews (0)
Shipping & Delivery
Related products
Сatalog number:
D8611
Barnstead™ Easypure™ II
Сatalog number:
50136172
Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System
Gain flexibility in the lab with the Thermo Scientific™ Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System. Its advanced technologies allow for simultaneous dispensing from up to three remote dispensers for ease of use in shared laboratory environments. This lab water system comes with leak detection, electronic dispensing for fully automatic volume control and feed water monitoring that alerts users to fluctuations in the feed water quality. All consumables needed for start-up come with the system, allowing for simple ordering and setup.
Сatalog number:
D12671
Barnstead™ RO System
Сatalog number:
061278
Cabinet Softening System WAE
Single softening cabinet systems have time control and are specially designed for discontinuous use. Ideal for laboratory point-of-use water purification systems, the Thermo Scientific™ Cabinet Softening System WAE is ready-to-connect, and softens feed water before feeding a reverse osmosis system. By removing hard ions, such as calcium and magnesium, the softened water extends the life of the reverse osmosis membrane.
Сatalog number:
50131323
Barnstead™ GenPure™ xCAD Water Purification System
Сatalog number:
D11971
Barnstead™ Nanopure™
Сatalog number:
50155482
Reverse Osmosis Systems RO 100-350 RDS
Produce product water that is less than 0.1µS/cm. Thermo Scientific™ Reverse Osmosis RO 100-350 RDS systems features an integrated ion exchanger, storage tank and pressure pump in a dust-proof cabinet. These systems are ideal supplier of high purity water for analyzers, as well as for general laboratory purposes according to international quality-standards like CLSI. The quality of the high purity water supplied by reverse osmosis is not sufficient when a conductivity below 1μS/cm is required. For such cases, the combination of reverse osmosis with ion exchanger is necessary.
Сatalog number:
50129890
Barnstead™ Smart2Pure™ Water Purification System
Convert tap water to ASTM Type 1 water with the compact, all-in-one Thermo Scientific™ Barnstead™ Smart2Pure™ Water Purification System. This complete system produces 3 or 6 liters of ultrapure water per hour. The Smart2Pure 3 and 6 feature a built-in 6L reservoir, while the Smart2Pure 12 offers the choice of a 30L or 60L reservoir for customizable storage capacity. Dispensing is easy and features variable speed to control flow. The display can be tilted for optimal reading. Position this system on the bench or mount on the wall.
Reviews
There are no reviews yet.