Gain flexibility and control with the compact remote dispenser in the Thermo Scientific™ Barnstead™ GenPure™ xCAD Water Purification System. This system delivers ultrapure water with consistent quality for the most demanding and sensitive applications. The remote dispenser can be wall- or bench-mounted. Ideal for molecular biology, microbiology and analytical chemistry applications, the system features integrated feed water monitoring, quick-connect cartridge replacement and exact dosing. Integrated feed water monitoring: Additional measuring cell monitors feed water conductivity. If the quality of the feed water drops below the set value, a fault message is immediately displayed. UV Photo-oxidation 185/254 nm: High performance UV assembly reliably reduces the content of microorganisms and their metabolites. Ready to use: Feed water pressure switch, wall bracket, UV lamp, ultrapure cartridge and sterile filter are all included in one part number. Measurement of conductivity/resistivity: Conductivity cells are carefully calibrated prior to each measurement via built-in reference resistance with cell constants at 0.01 cm -1 . Temperature measurements are made by a platinum chip sensor with ±0.1°C accuracy. Quick-connect cartridge replacement: Aquastop quick-connect capability enables cartridge replacement within seconds even mid-operation. Exact dosing: Electronic dosing allows fully automatic volume control of 0.01-65L with <0.5% accuracy. GLP-compliant documentation: Real-time clock and code-protected operating system prevent unauthorized changes to system settings. RS-232 interface with adjustable send interval allows safe data transfer of all measured data, faults, date and time to a PC computer or log printer. Digital microprocessor control automatically monitors and stores faults from the last four weeks. USP-compliant conductivity measurement with temperature compensation can be switched on or off.
Barnstead™ GenPure™ xCAD Water Purification System
This item is no longer available and has been replaced by the next generation of Thermo Scientific™ Barnstead™ Water Purification Systems. The recommended replacement for this product is
Сatalog number:
50131323
Category: Water Purification Systems
Description
Additional information
Conductivity |
0.055 µS/cm |
---|---|
Bacterial Content |
<1 CFU/mL |
Endotoxin Concentration |
0.001 EU/mL |
Feedwater Connector |
R 3/4 in. |
Feed Water Monitoring |
Yes |
Feedwater Source |
Pretreated |
Flow Rate |
Up to 2 L/min. |
Remote Dispenser |
Yes |
Resistivity |
18.2 Mohm.cm |
TOC Monitor with UV Intensity Monitoring |
Yes, No |
Total Organic Carbon |
1 to 5 ppb, 5 to 10 ppb |
Type |
Water Purification System |
Feedwater Pressure |
1 to 6 bar |
Operating Pressure |
2 to 6 bar |
Particles >0.2µM/mL |
<1 μM/mL |
Power Consumption |
0.1 kW |
Width (Metric) |
372 mm, 2°C to 35°C |
Height (Metric) |
615 mm, 372 mm |
Depth (Metric) |
330 mm, 615 mm |
Net Weight (Metric) |
25 kg, 330 mm |
Electrical Requirements |
90/240 V 50/60 Hz |
Reviews (0)
Be the first to review “Barnstead™ GenPure™ xCAD Water Purification System” Cancel reply
Shipping & Delivery
Related products
Сatalog number:
50132132
Barnstead™ Pacific TII Water Purification System
Convert tap water into Type 2, high purity water with the automatic and cost-efficient Thermo Scientific™ Barnstead™ Pacific TII Water Purification System. This system supports daily requirements from 20 to 200 liters. It removes approximately 98% of inorganic ions and 99% of all dissolved organic substances, as well as microorganisms and particles, with its high performance, reverse osmosis membrane.
Сatalog number:
062617
Double Softening System WAT
For continuous production of softened water. Thermo Scientific™ Double Softening System WAT includes a hardness sensor control that automatically regenerates resin once hardness is detected in one of the two cartridges. This ready-to-connect water softener is for softening feed water before feeding a reverse osmosis system. Water softening removes hard ions, such as calcium and magnesium, and extends the life of the reverse osmosis membrane.
Сatalog number:
D13321
Barnstead™ Easypure™ RoDi
Сatalog number:
50157886
Barnstead™ Pretreatment for Point of Use Water Purification Systems
Сatalog number:
50155482
Reverse Osmosis Systems RO 100-350 RDS
Produce product water that is less than 0.1µS/cm. Thermo Scientific™ Reverse Osmosis RO 100-350 RDS systems features an integrated ion exchanger, storage tank and pressure pump in a dust-proof cabinet. These systems are ideal supplier of high purity water for analyzers, as well as for general laboratory purposes according to international quality-standards like CLSI. The quality of the high purity water supplied by reverse osmosis is not sufficient when a conductivity below 1μS/cm is required. For such cases, the combination of reverse osmosis with ion exchanger is necessary.
Сatalog number:
50157885
Water Purification System Wall Mounting Bracket
Сatalog number:
50146378
Dionex™ IC Pure™ Water Purification System
The Thermo Scientific™ Dionex™ IC Pure™ water purification system brings reagent-free ion chromatography to the next level by producing ultrapure water used in the analysis of anions, cations, organic acids, carbohydrates, and amines in water samples. This system has been engineered to remove impurities that threaten your results so you can focus on what is important – the sensitivity and resolution of your ion chromatography analysis. Additionally, the Dionex IC Pure water purification system provides ultrapure water to the entire Dionex RFIC product line.
Сatalog number:
50132389
Reviews
There are no reviews yet.