Intelligent Controls: Automate operation, monitor system performance and pressure Display key data including membrane performance, reservoir level and cartridge status Monitor incoming water and membrane pressure and indicate when prefilter must be changed Simple Operation and Maintenance: Delivers multistep purification in a single system Includes all required components Technology Innovations: Composite polyamide RO membranes Unique MPS that protects membranes from surface scale buildup, eliminates need for softening and extends membrane life Automatic flush that cleans RO membrane(s) to help eliminate buildup of scale on membrane and extends membrane life Compact, Flexible and Quiet: Small footprint fits any size lab and features convenient wall- or bench-mounting. Wall bracket is included with system. Optional Remote Mounting Control Panel enables placement up to 10′ (3m) away. 12 and 24L/hr. systems include silent-running pump. 6L/hr. system uses available in-house line pressure. Includes: Prefilter MPS cartridge Extruded carbon filter RO membrane (two supplied with D12661) Wall bracket Recommended for: Buffer/reagent prep Glassware washing Type 1 water system feed General lab use Ordering Information: Optional accessories include Remote Control Mounting Panel (AY1265X1) and Hot/Cold Mixing Valve (D7427). These products and replacement consumables are sold separately; contact your Sales Representative for details. Requires: Tank, sold separately. Contact your sales representative for details.
Sold out
Barnstead™ RO System
This product has been discontinued. For additional information or alternate products please contact your sales representative. The recommended replacement for this product is the
Description
Additional information
| Bacterial Content |
99% |
|---|---|
| Certifications/Compliance |
CE, CSA |
| Chlorine Tolerance |
1000 ppm/hr. |
| Contaminant Rejection (Microbiological) |
99% |
| Contaminant Rejection (Minimum Ionic) |
Monovalent: 90 to 95%; Polyvalent: 95 to 99 |
| Contaminant Rejection (Organic) |
99% |
| Contaminant Rejection (Particulate) |
90 to 95% |
| Feed Water Monitoring |
No |
| Feedwater Source |
Tap |
| Flow Rate |
6 L/hr., 12 L/hr., 24 L/hr. |
| Product Water Type |
Ultrapure (Type 1) |
| TOC Monitor with UV Intensity Monitoring |
No |
| Type |
Reverse Osmosis System |
| Feedwater Pressure |
30 to 100 psig (2 to 6.9 bar) |
| Iron Total as Fe |
<0.5ppm |
| Max. TDS as CaCO3 |
800 ppm |
| Particles >0.2µM/mL |
<1 μM/mL |
| Resistivity |
18.2MΩ·cm |
| Silica |
<30ppm |
| Silt Density Index |
<5%, <30ppm |
| Temperature Range (English) |
34°F to 95°F |
| Temperature Range (Metric) |
1°C to 35°C |
Reviews (0)
Shipping & Delivery
Related products
Сatalog number:
50131217
Barnstead™ GenPure™
Produce Type 1 ultrapure water with consistent quality for your most demanding and sensitive applications with the Thermo Scientific™ Barnstead™ GenPure™ water purification system. This system offers outstanding control, as well as high-precision, USP-complying conductivity measurement with temperature compensation that can be switched on or off. All GenPure™ systems exceed international standard ASTM Type I, ISO 3696 Grade 1, ASTM D1193 and CLSI-CLRW.
Сatalog number:
50136172
Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System
Gain flexibility in the lab with the Thermo Scientific™ Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System. Its advanced technologies allow for simultaneous dispensing from up to three remote dispensers for ease of use in shared laboratory environments. This lab water system comes with leak detection, electronic dispensing for fully automatic volume control and feed water monitoring that alerts users to fluctuations in the feed water quality. All consumables needed for start-up come with the system, allowing for simple ordering and setup.
Сatalog number:
50157885
Water Purification System Wall Mounting Bracket
Сatalog number:
062617
Double Softening System WAT
For continuous production of softened water. Thermo Scientific™ Double Softening System WAT includes a hardness sensor control that automatically regenerates resin once hardness is detected in one of the two cartridges. This ready-to-connect water softener is for softening feed water before feeding a reverse osmosis system. Water softening removes hard ions, such as calcium and magnesium, and extends the life of the reverse osmosis membrane.
Сatalog number:
50157375
Point of Dispense Filters for Barnstead™ Point of Use Water Purification Systems
Сatalog number:
D14041
Barnstead™ TII Type 2 Water System
Сatalog number:
061278
Cabinet Softening System WAE
Single softening cabinet systems have time control and are specially designed for discontinuous use. Ideal for laboratory point-of-use water purification systems, the Thermo Scientific™ Cabinet Softening System WAE is ready-to-connect, and softens feed water before feeding a reverse osmosis system. By removing hard ions, such as calcium and magnesium, the softened water extends the life of the reverse osmosis membrane.
Сatalog number:
50146378
Dionex™ IC Pure™ Water Purification System
The Thermo Scientific™ Dionex™ IC Pure™ water purification system brings reagent-free ion chromatography to the next level by producing ultrapure water used in the analysis of anions, cations, organic acids, carbohydrates, and amines in water samples. This system has been engineered to remove impurities that threaten your results so you can focus on what is important – the sensitivity and resolution of your ion chromatography analysis. Additionally, the Dionex IC Pure water purification system provides ultrapure water to the entire Dionex RFIC product line.
Reviews
There are no reviews yet.