Twin softening systems with hard water sensor (1in.) Twin softening systems with hard water sensor Sensor initiates one of two cartridges to automatically regenerate Features include error messages and automatic switch off (LED lights) Potential free contact for connection to a central fault collector, which allows the system to be connected to the users central error collection monitor Water connections are R 1 in. 230V/50Hz Twin softening system with hard water sensor (2 in.) Twin softening systems with hard water sensor Sensor initiates one of two cartridges to automatically regenerate Top mounted with inlet and outlet pipe bridge fitted with automatic switchover and electronic sensor control, making the system easier to install Fault-triggered switch off with hard water as well as signal output and potential free contact for fault messages — If error isn’t addressed, system will automatically turn off Connector for solenoid or membrane valve Glass-fiber pressure container Brass automatic valve with 4-stage regeneration procedure Water connections are R2 in. 230V/50Hz Ordering Information: This product is not available in all regions
Double Softening System WAT
For continuous production of softened water. Thermo Scientific™ Double Softening System WAT includes a hardness sensor control that automatically regenerates resin once hardness is detected in one of the two cartridges. This ready-to-connect water softener is for softening feed water before feeding a reverse osmosis system. Water softening removes hard ions, such as calcium and magnesium, and extends the life of the reverse osmosis membrane.
Description
Additional information
| Capacity (Metric) |
2 x 120 m³ at 10°dH |
|---|---|
| Feed Water Monitoring |
Yes |
| Flow Rate |
14 L/hr. |
| Type |
Water Softening System, WAT |
| Salt Stock |
400 kg |
| Width (Metric) |
2540 mm |
| Height (Metric) |
2150 mm |
| Depth (Metric) |
900 mm |
| Unit Size |
Each |
Reviews (0)
Shipping & Delivery
Related products
Сatalog number:
50132391
Barnstead™ LabTower™ RO Water Purification System
Convert tap water into reverse osmosis (RO) water with integrated 100L storage using the Thermo Scientific™ Barnstead™ LabTower™ RO Water Purification System, which allows the user to easily read parameters with an ultra-modern controller. Mounted on casters, this compact system is an ideal pure water supply for any laboratory. The system is well-suited as a feed water source for dishwashers, autoclaves and general laboratory use. Choose from two system options with permeate flows of 20, 49 or 60L/hr. Resistivity/conductivity is clearly displayed on a large back-lit control panel that tilts for optimum viewing.
Сatalog number:
D14041
Barnstead™ TII Type 2 Water System
Сatalog number:
50132389
Barnstead™ Pacific™ RO Water Purification System
Сatalog number:
50157886
Barnstead™ Pretreatment for Point of Use Water Purification Systems
Сatalog number:
50132396
Barnstead™ LabTower™ EDI Water Purification System
Stock high purity water safely and conveniently with the integrated 100L reservoir of the Thermo Scientific™ Barnstead™ LabTower™ EDI Water Purification System. This system combines purification with EDI technology and storage in one. Conveniently dispense Type 1 water directly from the system while Type 2 water is accessible from the reservoir, an ideal supply for lab equipment. Free up bench space with this mobile free-standing unit that can be easily relocated with bottom-mounted rollers.
Сatalog number:
LMX31
Barnstead™ RO and TII Accessories and Consumables
Optimize your water purification system with Thermo Scientific™ Barnstead™ RO and TII Accessories and Consumables. For use with Barnstead RO and TII water purification systems, these products include filters and pre-filters, cartridges, overflow cutoff float and pump interlock cable, as well as dispensers and printer.
Сatalog number:
50155482
Reverse Osmosis Systems RO 100-350 RDS
Produce product water that is less than 0.1µS/cm. Thermo Scientific™ Reverse Osmosis RO 100-350 RDS systems features an integrated ion exchanger, storage tank and pressure pump in a dust-proof cabinet. These systems are ideal supplier of high purity water for analyzers, as well as for general laboratory purposes according to international quality-standards like CLSI. The quality of the high purity water supplied by reverse osmosis is not sufficient when a conductivity below 1μS/cm is required. For such cases, the combination of reverse osmosis with ion exchanger is necessary.
Сatalog number:
50136172
Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System
Gain flexibility in the lab with the Thermo Scientific™ Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System. Its advanced technologies allow for simultaneous dispensing from up to three remote dispensers for ease of use in shared laboratory environments. This lab water system comes with leak detection, electronic dispensing for fully automatic volume control and feed water monitoring that alerts users to fluctuations in the feed water quality. All consumables needed for start-up come with the system, allowing for simple ordering and setup.
Reviews
There are no reviews yet.