Twin softening systems Twin softening systems provide a continuous supply of softened water The two ion exchangers ensure that softened water is always available Electronic volume control measures volume through the softener; once limit is reached, automatic regeneration is carried out immediately once the current cartridge is exhausted Water connection is a R1 in. brass automatic valve with 4-stage regeneration process All water connections are standard either R 1 in. or R 1 1/2 in. 230V/50Hz Ordering Information: This product is not available in all regions
Double Softening System WMS
Monitor total water processed using the electronic volume control featured in Thermo Scientific™ Double Softening System WMS. Once the limit is reached, the system will automatically regenerate. This is ideal when a continuous supply of softened water is required, such as for larger systems or clinical feed water systems. This ready-to-connect water softener is for softening feed water before feeding a reverse osmosis system. Water softening removes hard ions, such as calcium and magnesium, extending the life of the reverse osmosis membrane.
Description
Additional information
| Capacity (Metric) |
2 x 80 m³ at 10°dH |
|---|---|
| Flow Rate |
6.5 L/hr. |
| Type |
Water Softening System, WMS |
| Salt Stock |
250 kg |
| Width (Metric) |
2460 mm |
| Height (Metric) |
1905 mm |
| Depth (Metric) |
900 mm |
| Unit Size |
Each |
Reviews (0)
Shipping & Delivery
Related products
Сatalog number:
50157375
Point of Dispense Filters for Barnstead™ Point of Use Water Purification Systems
Сatalog number:
50155482
Reverse Osmosis Systems RO 100-350 RDS
Produce product water that is less than 0.1µS/cm. Thermo Scientific™ Reverse Osmosis RO 100-350 RDS systems features an integrated ion exchanger, storage tank and pressure pump in a dust-proof cabinet. These systems are ideal supplier of high purity water for analyzers, as well as for general laboratory purposes according to international quality-standards like CLSI. The quality of the high purity water supplied by reverse osmosis is not sufficient when a conductivity below 1μS/cm is required. For such cases, the combination of reverse osmosis with ion exchanger is necessary.
Сatalog number:
D4642-33
Barnstead™ E-Pure™ Ultrapure Water Purification Systems
Produce Type 1 ultrapure water with low operating costs using Thermo Scientific™ Barnstead™ E-Pure™ Ultrapure Water Purification Systems. Choose from a three- or four-module system. Gain longer cartridge life and benefit from lower operating costs with large cartridges. This system is Ideal for AA, GS, buffer preps, or as a purified feed water source for analytical instruments or labware washers. It is simple to use and easy to maintain.
Сatalog number:
D11971
Barnstead™ Nanopure™
Сatalog number:
50131323
Barnstead™ GenPure™ xCAD Water Purification System
Сatalog number:
50157882
Barnstead™ Smart2Pure™ Pro Water Purification System
Сatalog number:
D14041
Barnstead™ TII Type 2 Water System
Сatalog number:
D13321
Reviews
There are no reviews yet.