Mixing, kneading, compounding and plasticizing A typical mixer test is run at a defined speed (shear rate) versus time, and the material’s response is recorded as torque. The mixing chamber is temperature-controlled precisely by independent heating and cooling zones, but due to the frictional heat in the mixing bowl, a change in the material’s melt temperature is observed and recorded as measuring signal. This “Rheogram” (torque, melt temperature vs. time at constant speed) is characteristic for different materials or blends and often used as a “fingerprint” in Quality Control for incoming or outgoing product inspection. Different additives in type and concentration can be measured and quantified objectively through the melting behavior, consumed energy or melt viscosity (recorded torque). Typical investigations Testing the melting and degradation behavior of polymer melts Quantifying viscosity when adding nano-particles or other additives Testing the gelation- and plasticizing behavior of PVC dry-blends Measuring the flow- and curing behavior of thermosetting plastics Characterizing the influences of different additives such as carbon black, fillers, lubricants, accelerators or sulphur for rubber mixtures Recording the masticating and vulcanizing behavior of elastomers Measuring the oil absorption of carbon black Quantifying the absorption of DOP for PVC dry-blends Measuring the stable torque in regard to individual and combined influences of fillers and additives such as stabilizers, lubricants and color pigments Testing high performance plastics to check processability Performing electric conductivity measurements for rubber mixtures
Back to products
Basic Vortex Mixers
$456.00 – $466.00
HAAKE™ Rheomix QC Lab Mixers for the HAAKE™ PolyLab™ QC System
Call for Price
HAAKE™ Rheomix QC Lab Mixers for the HAAKE™ PolyLab QC System torque rheometer platform are focused on batch testing of many highly viscous substances.
Сatalog number:
QCMIXER
Category: Extruders
Description
Additional information
Torque Rheometer |
Yes |
---|---|
Unit Size |
Each |
Reviews (0)
Be the first to review “HAAKE™ Rheomix QC Lab Mixers for the HAAKE™ PolyLab™ QC System” Cancel reply
Shipping & Delivery
Related products
Сatalog number:
553-0060
Energy 11 Twin-Screw Extruder
The Energy 11 Twin-Screw Extruder can be set up for a wide range of applications encountered in current battery R&D. The fully ported, horizontally split barrel allows for flexible feeding of solid and liquid ingredients. Interchangeable die designs adapt to a range of materials from dry granules, polymeric solid-state electrolytes, and electrode films to wet slurries. Eight precisely controlled temperature zones along the barrel ensure flexibility in processing.
Сatalog number:
567-2275
HAAKE™ MiniLab 3 Micro Compounder
Call for Price
Сatalog number:
567-2090
HAAKE™ MiniCTW Micro-Conical Twin Screw Compounder
Сatalog number:
553-1040
Pharma 16 Twin-Screw Extruder
Rapidly develop pharmaceutical formulations and adopt continuous processing methods using the Thermo Scientific™ Pharma 16 Twin-Screw Extruder. The Pharma 16 Twin-Screw Extruder can switch between continuous hot melt extrusion (HME) or wet granulation (TSG) with ease. Optimize drug process development parameters with less time and effort than batch processes and easily scale-up to larger Thermo Scientific™ extruders with using minimal amounts of expensive APIs and excipients.
Сatalog number:
567-1040
HAAKE™ Rheomix OS Lab Mixers for the HAAKE™ PolyLab™ OS system
Call for Price
Сatalog number:
553-2039
Pharma 24 Twin-Screw Extruder
Call for Price
The Thermo Scientific™ Pharma 24 Twin-Screw Extruder, with avaialble HME and Twin-Screw Granulation (TSG) Application Sets, is ideal for continuous processing in research, development or production in the pharmaceutical industry. The Pharma 24 extruder drives reduced clean room area, consistent and controllable processing, reduced product changeover time, on-demand production, minimized scale-up risk and reliable cleaning. It is suitable for process analytical technology (PAT).
Сatalog number:
567-2030
HAAKE™ Rheomex CTW 100 OS Twin-Screw Extruder for the HAAKE™ PolyLab™ OS System
Сatalog number:
567-2020
HAAKE™ Rheomex OS Single Screw Extruder for the HAAKE™ PolyLab™ OS system
Call for Price
Thermo Scientific™ HAAKE Rheomex lab single screw extruders for the HAAKE PolyLab OS torque rheometer platform are focused on the analysis of rheological and processing characteristics of various materials. With only a small sample, amount customers can simulate production processes and generate films or profiles for further testing.
Reviews
There are no reviews yet.