Features: Sterile bottles with molded-in graduations and neck-ring Non-cytotoxic, non-hemolytic and non-pyrogenic Display excellent gas barrier properties Gamma irradiated to 10 -6 Sterility Assurance Level (SAL) Made from ADC (Animal Derived Component) Free material Bottles are packed without closures – order separately 342151-0384 Note: Bottles are tested during each manufacturing run to ensure leakproof† performance. Suitable for air shipment. †The term “leakproof” applies to Thermo Scientific Nalgene products that meet the following criteria: a) Bottle/flask/funnel closure systems with closures smaller than 100mm, after they are filled with water, inverted, withstand air pressure of 2psig for 2 minutes, and no water escapes;. b) Bottle/funnel/flask closure systems of larger than 100mm after they are filled with water, inverted for 15 minutes, and no water escapes. Note: these tests, using other liquids, may not yield the same results. To ensure safe usage, customers are advised to test Thermo Scientific Nalgene bottles and closures under conditions of their planned applications. Thermo Scientific Nalgene products are leakproof at ambient temperature and pressure when used with their Nalgene closures.
Sold out
Nalgene™ Septum Closures: Sterile, Bulk Pack, 38-430mm
Combine the elastomeric sealing of silicone with nonreactive polytetrafluoroethylene reagent contact surfaces in Thermo Scientific™ Nalgene™ Septum Closures, for use with Nalgene™ Sterile PET & PETG media bottles.
Сatalog number:
342178-0384
Category: Bottle Caps
Description
Additional information
Closure Material | Polyethylene |
---|---|
Closure Size | 38-430 mm, 24-415 mm |
For Use With (Equipment) | Nalgene Sterile PET and PETG media bottles |
Product Type | Closure |
Color | White |
Material | HDPE, Silicone, PTFE Septum |
No. per Case | 240, 200 |
No. per Pack | 240, 200 |
Packaging | Bulk |
Sterility | Sterile |
Certifications/Compliance | Manufactured in compliance with ISO 13485 quality requirements |
Closure Included | Yes |
Fit for Purpose | Sterile |
Unit Size | Case of 240, Case of 200 |
Reviews (0)
Be the first to review “Nalgene™ Septum Closures: Sterile, Bulk Pack, 38-430mm” Cancel reply
Shipping & Delivery
Related products
Сatalog number:
DS2176-0384
Nalgene™ Polypropylene Pour Spout
Сatalog number:
712411-1125
Nalgene™ Narrow-Mouth and Wide-Mouth Bottle Replacement Closures
Сatalog number:
75003511
Sorvall™ High Performance Aluminum Cap for 1L Centrifuge Bottle, Pack of 2
Achieve performance up to 20,584 x g with the Thermo Scientific™ Sorvall™ high performance aluminum cap for 1-liter centrifuge bottles, designed for superspeed and large capacity centrifuges. This high-strength aluminum cap enhances bottle support and improves chemical resistance to Phenol solutions when compared with Noryl™ plastic caps. These caps are available for both polypropylene copolymer (PPCO) bottles, designed for excellent chemical resistance and are autoclavable, or polycarbonate (PC) bottles, which are designed for excellent clarity.
Сatalog number:
712240-1053
Nalgene™ Carboy Replacement Screw Closures and Gaskets
Сatalog number:
362150-7384
Nalgene™ Colored Polypropylene Closures with 38-430 Finish
Сatalog number:
342151-0384
Nalgene™ HDPE Closures: Sterile, Bulk Pack
Сatalog number:
312160-0530
Heat-Shrink Bands for Nalgene™ PETG Media Bottles
Ensure the integrity of bottle contents with Thermo Scientific™ Heat-Shrink Bands for Thermo Scientific™ Nalgene™ PETG Media Bottles. Simply apply the recommended application torque for Thermo Scientific Nalgene closures and slide the heat-shrink band over the closure and bottle neck. Heat the band to shrink and secure contents with a tamper-resistant seal.
Сatalog number:
342141-0384
Reviews
There are no reviews yet.