Turbidity Measurement System Components: Wide-Range Water Turbidity Sensor Head Communications Adapter Wash Head: For use in applications where the sensor head can be quickly fouled with sediment Head slips on the sensor body and wash nozzle aligns with sensor fingers Actuation controlled by AV38 wash relay programmed with wash interval and duration AV38 Local Display/Controller: Two-line display and seven key navigation Data reporting with up to two current outputs Two Form C relays Digital communications Recommended for: Drinking water Raw water monitoring Back water monitoring Wastewater effluent Process clarity monitoring
Sold out
AquaSensor™ DataStick™ Wide-Range Turbidity Measurement System
Monitor wastewater and surface water turbidity with the Thermo Scientific™ AquaSensors™ DataStick™ Wide-Range Turbidity Measurement System, which features a replaceable, pre-calibrated (for turbidity and temperature) sensor head.
Description
Additional information
| Accuracy |
1% of reading |
|---|---|
| Approvals |
Meets CE requirements for heavy industrial use |
| Range |
0 to 4000 NTU |
| Step Response Time |
90% in <15 sec. |
| Type |
Wide-Range Turbidity Measurement System, Stainless Steel, Wide-Range Turbidity Measurement System, CPVC |
| Certifications/Compliance |
CE, UL, ISO |
| Resolution |
0.1 NTU |
| Unit Size |
Each |
Reviews (0)
Shipping & Delivery
Related products
Сatalog number:
OZPEEK1B
AquaSensors™ Datastick™ Dissolved Ozone Measurement System
Сatalog number:
AV88
AquaSensors™ AV88 AnalogPlus™ Universal Analyzer
Сatalog number:
ASDSPH
AquaSensors™ DataStick™ pH Measurement System
Perform differential pH measurements with a precalibrated plug-and-play sensor using the Thermo Scientific™ AquaSensors™ DataStick™ pH Measurement System. A replaceable reference junction contributes to long sensor life. Direct 24-bit data reporting is done via a variety of direct-to-PLC industrial communication protocols.
Сatalog number:
TCPEEK
AquaSensors™ DataStick™ Toroidal Conductivity Measurement System
Сatalog number:
COD165
Orion™ AQUAfast COD165 Thermoreactor
Conduct environmental and wastewater monitoring with the Thermo Scientific™ Orion™ AQUAfast COD165 Thermoreactor. The COD165 thermoreactor is equipped with an automatic voltage selector for voltages between 90 and 260 V with a frequency of 50 or 60 Hz. Select from five preset work temperatures of 100 °C, 120 °C, 150 °C, 160 °C and 165 °C and four preset run times of 30 minutes, 60 minutes, 120 minutes or continuous time. Simply place 16mm round sample tubes into the digestor wells, cover with the hinged safety shield, set the temperature and time and let samples digest.
Сatalog number:
711010-9507
Nalgene™ Settlometer Jar with Cover
Nalgene™ Settlometer Jar with Cover is a replacement part in the Nalgene™ Settlometer Kit Cat# 1010-0507. The Nalgene™ Settlometer Kit is used to analyze the activated sludge process in waste water treatment plants. The 2L jar is lightweight, transparent, highly impact-resistant and has easy to read white graduations.
Сatalog number:
CCPEEK
AquaSensors™ DataStick™ Conductivity Resistivity Sensors
Сatalog number:
AQTC0
Reviews
There are no reviews yet.