Features: Utilizes a precalibrated optical DataStick technology and unique sample chamber to meet or exceed USEPA Method 180.1 Offers 0.001 NTU resolution Low flow rate and 135mL sample chamber limits calibration solution usage Integral temperature measurement and plug-and-play communication adapters Recommended for: Drinking water Filter monitoring membrane filtration Distribution monitoring Wastewater effluent (clarified) Packaged water systems Food and beverage process
Sold out
AquaSensors™ AquaClear™ DataStick™ Low-Level Turbidimeter
Monitor water turbidity with the Thermo Scientific™ AquaSensors™ AquaClear™ DataStick™ Low-Level Turbidimeter, which may be used with any Thermo Scientific sensor head and can communicate directly with industrial computer systems.
Description
Additional information
| Accuracy |
±2% of reading or ±0.015 NTU whichever is greater. ±5% of reading above 40 NTU |
|---|---|
| Range |
0 to 200 NTU |
| Temperature (Metric) Air |
-20°C to +60°C |
| Temperature (Metric) Water |
-5°C to +50°C |
| Voltage |
24 VDC |
| Weight (English) |
5.6 lb. |
| Weight (Metric) |
2.54 kg |
| Type |
Monitor |
| Flow Rate |
4 to 7.9 gal./hr. |
| Power Supply |
8 w with AV38 DataStick and light source |
| Resolution |
0.001 NTU |
| Unit Size |
Each |
Reviews (0)
Shipping & Delivery
Related products
Сatalog number:
711010-9507
Nalgene™ Settlometer Jar with Cover
Nalgene™ Settlometer Jar with Cover is a replacement part in the Nalgene™ Settlometer Kit Cat# 1010-0507. The Nalgene™ Settlometer Kit is used to analyze the activated sludge process in waste water treatment plants. The 2L jar is lightweight, transparent, highly impact-resistant and has easy to read white graduations.
Сatalog number:
ASDSORP
AquaSensors™ Datastick™ ORP Measurement System
Сatalog number:
CCPEEK
AquaSensors™ DataStick™ Conductivity Resistivity Sensors
Сatalog number:
COD165
Orion™ AQUAfast COD165 Thermoreactor
Conduct environmental and wastewater monitoring with the Thermo Scientific™ Orion™ AQUAfast COD165 Thermoreactor. The COD165 thermoreactor is equipped with an automatic voltage selector for voltages between 90 and 260 V with a frequency of 50 or 60 Hz. Select from five preset work temperatures of 100 °C, 120 °C, 150 °C, 160 °C and 165 °C and four preset run times of 30 minutes, 60 minutes, 120 minutes or continuous time. Simply place 16mm round sample tubes into the digestor wells, cover with the hinged safety shield, set the temperature and time and let samples digest.
Сatalog number:
RT1SS
AquaSensor™ DataStick™ Wide-Range Turbidity Measurement System
Сatalog number:
OZPEEK1B
AquaSensors™ Datastick™ Dissolved Ozone Measurement System
Сatalog number:
ASDSSLDS
AquaSensors™ DataStick™ Suspended Solids Measurement System
Сatalog number:
TCPEEK
Reviews
There are no reviews yet.