Integrate the accessories for the Thermo Scientific™ Barnstear™ TII Type 2 Water System such as distribution pumps and UV lamps with the system itself to create a more complete lab solution.
Sold out
Accessories for the Barnstead™ TII Type 2 Water System
Integrate the accessories for the Thermo Scientific™ Barnstear™ TII Type 2 Water System such as distribution pumps and UV lamps with the system itself to create a more complete lab solution.
Description
Additional information
| Conductivity |
0.067 to 0.1 µS/cm |
|---|---|
| Bacterial Content |
<1 CFU/mL |
| Feedwater Source |
Tap |
| Product Water Type |
Type 2 |
| Resistivity |
15 Mohm.cm at 25°C |
| TOC Monitor with UV Intensity Monitoring |
No |
| Total Organic Carbon |
1 to 5 ppb |
| Type |
Interlock Cable, UV Lamp and Lamp for Storage Reservoir, Distribution Pump |
| Feedwater Pressure |
30 to 100 psig (2 to 6.9 bar) |
| Feedwater Temperature (Metric) |
4°C to 40°C |
| For Use With (Equipment) |
Barnstead™ TII Type 2 Water System |
| Purified Water Flowrate Field |
1 L/min. |
| RO Flow Rate |
12 L/hr. |
| Width (English) |
13.5 in. |
| Width (Metric) |
34.3 cm |
| Height (English) |
19.5 in. |
| Depth (English) |
18.5 in. |
| Depth (Metric) |
47 cm |
| Electrical Requirements |
100/240 VAC 50/60 Hz, 47 cm |
| Voltage |
100/240 VAC |
| Frequency |
50/60 Hz |
Reviews (0)
Shipping & Delivery
Related products
Сatalog number:
50155482
Reverse Osmosis Systems RO 100-350 RDS
Produce product water that is less than 0.1µS/cm. Thermo Scientific™ Reverse Osmosis RO 100-350 RDS systems features an integrated ion exchanger, storage tank and pressure pump in a dust-proof cabinet. These systems are ideal supplier of high purity water for analyzers, as well as for general laboratory purposes according to international quality-standards like CLSI. The quality of the high purity water supplied by reverse osmosis is not sufficient when a conductivity below 1μS/cm is required. For such cases, the combination of reverse osmosis with ion exchanger is necessary.
Сatalog number:
50129890
Barnstead™ Smart2Pure™ Water Purification System
Convert tap water to ASTM Type 1 water with the compact, all-in-one Thermo Scientific™ Barnstead™ Smart2Pure™ Water Purification System. This complete system produces 3 or 6 liters of ultrapure water per hour. The Smart2Pure 3 and 6 feature a built-in 6L reservoir, while the Smart2Pure 12 offers the choice of a 30L or 60L reservoir for customizable storage capacity. Dispensing is easy and features variable speed to control flow. The display can be tilted for optimal reading. Position this system on the bench or mount on the wall.
Сatalog number:
D13321
Barnstead™ Easypure™ RoDi
Сatalog number:
D14041
Barnstead™ TII Type 2 Water System
Сatalog number:
50136172
Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System
Gain flexibility in the lab with the Thermo Scientific™ Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System. Its advanced technologies allow for simultaneous dispensing from up to three remote dispensers for ease of use in shared laboratory environments. This lab water system comes with leak detection, electronic dispensing for fully automatic volume control and feed water monitoring that alerts users to fluctuations in the feed water quality. All consumables needed for start-up come with the system, allowing for simple ordering and setup.
Сatalog number:
50131323
Barnstead™ GenPure™ xCAD Water Purification System
Сatalog number:
07.3900-EDI
Reverse Osmosis EDI Systems (600 – 1200L/hr)
Сatalog number:
50132132
Barnstead™ Pacific TII Water Purification System
Convert tap water into Type 2, high purity water with the automatic and cost-efficient Thermo Scientific™ Barnstead™ Pacific TII Water Purification System. This system supports daily requirements from 20 to 200 liters. It removes approximately 98% of inorganic ions and 99% of all dissolved organic substances, as well as microorganisms and particles, with its high performance, reverse osmosis membrane.
Reviews
There are no reviews yet.