Features: Each system produces ultrapure water that exceeds the quantitative specifications of Type 1 water as described in ASTM™ D1193, ISO 3696, and CLSI-CLRW. Three cartridges in series provide increased capacity over similar systems. A 0.2μm final filter at the point of use provides water free of particles and bacteria. Quiet pump provides optimal flowrates and silent operation. Standby mode recirculates purified water during inactivity to ensure purity and allows for on-demand use. All components are constructed of inert materials, ensuring maximum ionic and organic purity. Supplied wall bracket allows increased flexibility when choosing a location. Integral low water and low pressure pump protectors protect the pump in the event feedwater is interrupted to the system. Easypure II: Base unit For buffer prep, titration, solutions, AA TOC 5 to 10ppb Easypure II UV: Ultralow organics For HPLC, TOC, GC/MS TOC 1 to 5ppb Easypure II UFI: Eliminates pyrogens For cell and tissue culture, monoclonal antibody production, electrophoresis TOC 5 to 10ppb Easypure II UV: Lowest levels of organics, pyrogens and nucleases For PCR 2-D electrophoresis, cell culture, blotting TOC 1 to 5ppb Ordering Information: Optional accessories include Remote Dispenser (0903515) and replacement consumables (UV lamps, ultrafilters and cleaning syringe); order separately. Contact your Sales Representative for details. Includes: Wall mounting bracket, cleaning syringe, UV lamp (Easypure II UV and UV/UF only), ultrafilter (Easypure II UF and UV/UF only). Requires: Cartridges and filters Recommended for: HPLC ICP GC/MS Cell and tissue culture PCR Note: Feedwater must be pre-treated by reverse osmosis, distillation or deionization
Sold out
Barnstead™ Easypure™ II
This product has been discontinued. For additional information or alternate products please contact your sales representative. The recommended replacement for this product is
Description
Additional information
| Certifications/Compliance |
CE, CSA |
|---|---|
| Conductivity |
0.055 µS/cm |
| Bacterial Content |
<1 CFU/mL |
| Endotoxin Concentration |
0.001 EU/mL |
| Feed Water Monitoring |
No |
| Feedwater Source |
Pretreated |
| Flow Rate |
Up to 1 L/min., 1 L/min. |
| Product Water Type |
Type 1 |
| Resistivity |
18.2 Mohm.cm at 25°C |
| TOC Monitor with UV Intensity Monitoring |
No |
| Total Organic Carbon |
1 to 5 ppb, 0 to 10 ppb, 5 to 10 ppb |
| Type |
Water Purification System |
| Feedwater Pressure |
100 psig (6.9 bar) |
| Feedwater Temperature (Metric) |
4°C to 40°C |
| Model |
UV/UF model, RF model, RF/UV model, Line feed (LF) model, UV model, UF model |
| Particles >0.2µM/mL |
<1 μM/mL |
| Voltage |
100/240 V |
| Frequency |
50/60 Hz |
| Unit Size |
-, 50/60 Hz |
| Electrical Requirements |
100/240 VAC 50/60 Hz, 100/240 V 50/60 Hz |
Reviews (0)
Shipping & Delivery
Related products
Сatalog number:
50132132
Barnstead™ Pacific TII Water Purification System
Convert tap water into Type 2, high purity water with the automatic and cost-efficient Thermo Scientific™ Barnstead™ Pacific TII Water Purification System. This system supports daily requirements from 20 to 200 liters. It removes approximately 98% of inorganic ions and 99% of all dissolved organic substances, as well as microorganisms and particles, with its high performance, reverse osmosis membrane.
Сatalog number:
50146378
Dionex™ IC Pure™ Water Purification System
The Thermo Scientific™ Dionex™ IC Pure™ water purification system brings reagent-free ion chromatography to the next level by producing ultrapure water used in the analysis of anions, cations, organic acids, carbohydrates, and amines in water samples. This system has been engineered to remove impurities that threaten your results so you can focus on what is important – the sensitivity and resolution of your ion chromatography analysis. Additionally, the Dionex IC Pure water purification system provides ultrapure water to the entire Dionex RFIC product line.
Сatalog number:
50132391
Barnstead™ LabTower™ RO Water Purification System
Convert tap water into reverse osmosis (RO) water with integrated 100L storage using the Thermo Scientific™ Barnstead™ LabTower™ RO Water Purification System, which allows the user to easily read parameters with an ultra-modern controller. Mounted on casters, this compact system is an ideal pure water supply for any laboratory. The system is well-suited as a feed water source for dishwashers, autoclaves and general laboratory use. Choose from two system options with permeate flows of 20, 49 or 60L/hr. Resistivity/conductivity is clearly displayed on a large back-lit control panel that tilts for optimum viewing.
Сatalog number:
061278
Cabinet Softening System WAE
Single softening cabinet systems have time control and are specially designed for discontinuous use. Ideal for laboratory point-of-use water purification systems, the Thermo Scientific™ Cabinet Softening System WAE is ready-to-connect, and softens feed water before feeding a reverse osmosis system. By removing hard ions, such as calcium and magnesium, the softened water extends the life of the reverse osmosis membrane.
Сatalog number:
50157886
Barnstead™ Pretreatment for Point of Use Water Purification Systems
Сatalog number:
D11971
Barnstead™ Nanopure™
Сatalog number:
LMX31
Barnstead™ RO and TII Accessories and Consumables
Optimize your water purification system with Thermo Scientific™ Barnstead™ RO and TII Accessories and Consumables. For use with Barnstead RO and TII water purification systems, these products include filters and pre-filters, cartridges, overflow cutoff float and pump interlock cable, as well as dispensers and printer.
Сatalog number:
D12671
Reviews
There are no reviews yet.