Key Features: Maximum flowrate (at 10psi pressurized feed): 0.53 gal./min. (2L/min.) Inlet water temperature: 4° to 40°C (40° to 104°F) Built-in UV oxidation chamber in some models oxidizes and measures the levels of organics in the water 0.2μm absolute final filter maintains bacterial- and particle-free water Systems can be customized with a cartridge pack (available separately) to meet specific feedwater needs System Operation Features: Volumetric or timed dispensing of ultrapure water Multilanguage display Whisper-quiet operation Pressure-regulating valve that minimizes problems associated with fluctuations in feedwater pressure Automatic sanitization cycle that keeps system clean Standby mode that recirculates water every 10 minutes during periods of nonuse to maintain water quality Automatic calibration verifies electronics and assures accurate purity readings Can be wall- or bench-mounted without additional items Optional Thermo Scientific Barnstead Remote Dispenser and Thermo Scientific Barnstead Accudispense Volumetric Dispenser available for water delivery up to 8′ away Nanopure Analytical: For sensitive analytical procedures including atomic absorption, ICP and ICP/MS, ion chromatography (IC), gas chromatography (GC) and high-wavelength HPLC Nanopure Analytical UV: For critical applications requiring 18.2MΩ-cm water with 1 to 5ppb TOC, including low-wavelength HPLC, IC, GC/MS and TOC determinations Uses a dual-wavelength UV lamp to oxidize organics down to virtually undetectable levels and maintain minimal bacterial levels within the system Automatically alerts user for UV lamp replacement Nanopure Biological UF: For any pyrogen determinant analysis including PCR and cell and tissue culture An ultrafilter in the system produces ultrapure water with undetectable levels of pyrogens, less than 0.001EU/mL, log reduction values (LRV) over 6 Prevents buildup of contaminants on membrane surface; Nanopure periodically flushes water to drain Automatic cleaning cycle enables routine cleaning with the push of a button Nanopure Life Science UV/UF: For the most demanding molecular biology applications including PCR, electrophoresis, cell and tissue culture Includes latest advances in ion exchange and filtration technologies, as well as dual-wavelength UV bulb and ultrafilter Is of the the only validated water systems with the ability to remove nucleases such as RNase and DNase, as well as DNA, from challenged feedwater Includes automatic cleaning and automatic and manual ultrafilter flushing Produces 0.53 gal./min. (2L/min.) ultrapure water containing <0.001 EU/mL of pyrogens, 0.01 CFU/mL bacteria, <0.003ng/mL RNase, <0.4pg/μL DNase, TOC values 1-5ppb and resistivities up to 18.2MΩ-cm All Models Available with TOC-Monitoring Option: TOC models measure and display Total Organic Carbon content from 1 to 250ppb. Ordering Information: Optional Accessories include: Accudispense (0903526), Remote Dispenser (0903515), Printer (AY1137X1), Calibration Module (0903516), Low Pressure Pump Protector (D2706), Low Water Level Pump Protector (D8964) and Dispense Overflow Cutoff Float (AY1367X1). These products, as well as cartridge packs and replacement consumables, are available separately. For details, contact your sales representative. Includes: Wall bracket Cleaning syringe UV lamp and/or ultrafilter where applicable Requires: Cartridge pack (sold separately) Recommended for: HPLC ICP GC/MS Cell/tissue culture PCR
Barnstead™ Nanopure™
This product has been discontinued. For additional information or alternate products please contact your sales representative. The recommended replacements for this product are the Thermo Scientific™
Сatalog number:
D11971
Category: Water Purification Systems
Description
Additional information
Certifications/Compliance | Produces water that exceeds ASTM™, ISO 3696 and CLSI-CLRW Type I water requirements. CE, CSA |
---|---|
Conductivity | 0.055 µS/cm |
Bacterial Content | <1 CFU/mL |
Endotoxin Concentration | 0.001 EU/mL |
Feed Water Monitoring | No |
Feedwater Source | Pretreated |
Flow Rate | Up to 2 L/hr. |
Product Water Type | Type 1 |
Resistivity | 18.2 Mohm.cm |
TOC Monitor with UV Intensity Monitoring | No |
Total Organic Carbon | With TOC monitoring, Without TOC monitoring, 1 to 250 ppb |
Type | Life Science UV/UF, Analytical, Analytical UV, Biological UF, Nanopure Analytical UV |
Feedwater Pressure | 100 psig (6.9 bar) |
Feedwater Temperature (English) | 40°F to 104°F |
Feedwater Temperature (Metric) | 4°C to 40°C |
Model | With TOC Monitor, Standard |
Particles >0.2µM/mL | <1 μM/mL |
Dimensions (L x W x H) | 17.5 x 13.5 x 19.5 in. (44.5 x 34.3 x 49.5 cm) |
Length (English) | 17.5 in. |
Length (Metric) | 44.5 cm, 17.5 in. |
Width (English) | 13.5 in., 44.5 cm |
Width (Metric) | 34.3 cm |
Reviews (0)
Be the first to review “Barnstead™ Nanopure™” Cancel reply
Shipping & Delivery
Related products
Сatalog number:
50131323
Barnstead™ GenPure™ xCAD Water Purification System
Сatalog number:
D8611
Barnstead™ Easypure™ II
Сatalog number:
LMX31
Barnstead™ RO and TII Accessories and Consumables
Optimize your water purification system with Thermo Scientific™ Barnstead™ RO and TII Accessories and Consumables. For use with Barnstead RO and TII water purification systems, these products include filters and pre-filters, cartridges, overflow cutoff float and pump interlock cable, as well as dispensers and printer.
Сatalog number:
50132374
Barnstead™ MicroPure™ Water Purification System
Process up to 15L/day of ultra-pure water with the compact and reliable Thermo Scientific™ Barnstead™ MicroPure™ Water Purification System. This system is an outstanding choice for applications such as HPLC or other instrumental analyses, sample preparation, glassware rinsing or molecular biology work in which endotoxins and/or nucleases would interfere. Place the system without direct access to a water line with the optional integrated 6L feed water reservoir and easily view the screen with backlit tiltable display. Monitor feed water quality to help maximize cartridge life.
Сatalog number:
50136172
Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System
Gain flexibility in the lab with the Thermo Scientific™ Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System. Its advanced technologies allow for simultaneous dispensing from up to three remote dispensers for ease of use in shared laboratory environments. This lab water system comes with leak detection, electronic dispensing for fully automatic volume control and feed water monitoring that alerts users to fluctuations in the feed water quality. All consumables needed for start-up come with the system, allowing for simple ordering and setup.
Сatalog number:
061206
Double Softening System WMS
Monitor total water processed using the electronic volume control featured in Thermo Scientific™ Double Softening System WMS. Once the limit is reached, the system will automatically regenerate. This is ideal when a continuous supply of softened water is required, such as for larger systems or clinical feed water systems. This ready-to-connect water softener is for softening feed water before feeding a reverse osmosis system. Water softening removes hard ions, such as calcium and magnesium, extending the life of the reverse osmosis membrane.
Сatalog number:
50146378
Dionex™ IC Pure™ Water Purification System
The Thermo Scientific™ Dionex™ IC Pure™ water purification system brings reagent-free ion chromatography to the next level by producing ultrapure water used in the analysis of anions, cations, organic acids, carbohydrates, and amines in water samples. This system has been engineered to remove impurities that threaten your results so you can focus on what is important – the sensitivity and resolution of your ion chromatography analysis. Additionally, the Dionex IC Pure water purification system provides ultrapure water to the entire Dionex RFIC product line.
Сatalog number:
D14041
Reviews
There are no reviews yet.