Multiple Options for Type 2 water: Five system options with permeate flows of 3, 7, 12, 20 or 40L/hr Future system upgrades accommodate greater capacities to meet growing water demands Space-saving design permits benchtop installation or wall mounting with integrated mounting bracket Operational Reliability: Microprocessor controlled for automatic operation with continuous monitoring of all critical parameters Automatic return to “operating” mode ensures recirculation during standstill periods UV lamp prevents biological contamination (UV models only) Easy-to-Operate: Resistivity/conductivity clearly displayed on large, back-lit control panel that tilts for optimum viewing Status of current operating mode clearly indicating Production , Stand-by and Cleaning modes Reservoir fill-level shown as % System parameters are code-protected to prevent accidental changes to set points GLP-Compliant Documentation: Optional printer connects to RS-232 port for data recording and traceability Cell constant of 0.01cm -1 ensures precise conductivity measurements Temperature compensation for the conductivity measurement has an accuracy of ±0.1°C (in conformity with USP 645) Optional Hand Dispenser: Gain increased flexibility by adding a hand dispenser with 3-meter cord which connects to tank; use only with a tank equipped with a pressure pump (06.5032, 06.5062, 06.5082). Ships with a 0.2 micron final filter (Part #50138221) Warranty :1 year, parts and labor
Sold out
Barnstead™ Pacific TII Water Purification System
Convert tap water into Type 2, high purity water with the automatic and cost-efficient Thermo Scientific™ Barnstead™ Pacific TII Water Purification System. This system supports daily requirements from 20 to 200 liters. It removes approximately 98% of inorganic ions and 99% of all dissolved organic substances, as well as microorganisms and particles, with its high performance, reverse osmosis membrane.
Description
Additional information
| Bacterial retention |
99% |
|---|---|
| Conductivity |
0.1 to 1.0μS/cm |
| Bacterial Content |
99% |
| Daily Output |
20 to 200 L |
| Feedwater Connector |
3/4 in. NPT |
| Feed Water Monitoring |
No |
| Feedwater Source |
Tap |
| Flow Rate |
12 L/hr. at 10°C, 20 L/hr. at 10°C, 7 L/hr. at 10°C |
| Product Water Type |
Type 2 |
| Resistivity |
10 to 1 Mohm.cm at 25°C |
| TOC Monitor with UV Intensity Monitoring |
No |
| Total Organic Carbon |
<30 ppb |
| Type |
Water Purification System |
| Feedwater Pressure |
1 to 6 bar |
| Operating Pressure |
2 to 6 bar |
| Particles >0.2µM/mL |
<1 μM/mL |
| Temperature Range (Metric) |
2°C to 35°C |
| Width (Metric) |
372 mm |
| Height (Metric) |
613 mm, 372 mm |
| Depth (Metric) |
330 mm |
| Net Weight (Metric) |
25 kg |
Reviews (0)
Shipping & Delivery
Related products
Сatalog number:
D4642-33
Barnstead™ E-Pure™ Ultrapure Water Purification Systems
Produce Type 1 ultrapure water with low operating costs using Thermo Scientific™ Barnstead™ E-Pure™ Ultrapure Water Purification Systems. Choose from a three- or four-module system. Gain longer cartridge life and benefit from lower operating costs with large cartridges. This system is Ideal for AA, GS, buffer preps, or as a purified feed water source for analytical instruments or labware washers. It is simple to use and easy to maintain.
Сatalog number:
D8611
Barnstead™ Easypure™ II
Сatalog number:
50157882
Barnstead™ Smart2Pure™ Pro Water Purification System
Сatalog number:
50136172
Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System
Gain flexibility in the lab with the Thermo Scientific™ Barnstead™ GenPure™ xCAD Plus Ultrapure Water Purification System. Its advanced technologies allow for simultaneous dispensing from up to three remote dispensers for ease of use in shared laboratory environments. This lab water system comes with leak detection, electronic dispensing for fully automatic volume control and feed water monitoring that alerts users to fluctuations in the feed water quality. All consumables needed for start-up come with the system, allowing for simple ordering and setup.
Сatalog number:
50132389
Barnstead™ Pacific™ RO Water Purification System
Сatalog number:
D13321
Barnstead™ Easypure™ RoDi
Сatalog number:
07.3900-EDI
Reverse Osmosis EDI Systems (600 – 1200L/hr)
Сatalog number:
50155482
Reverse Osmosis Systems RO 100-350 RDS
Produce product water that is less than 0.1µS/cm. Thermo Scientific™ Reverse Osmosis RO 100-350 RDS systems features an integrated ion exchanger, storage tank and pressure pump in a dust-proof cabinet. These systems are ideal supplier of high purity water for analyzers, as well as for general laboratory purposes according to international quality-standards like CLSI. The quality of the high purity water supplied by reverse osmosis is not sufficient when a conductivity below 1μS/cm is required. For such cases, the combination of reverse osmosis with ion exchanger is necessary.
Reviews
There are no reviews yet.