Technical benefits at a glance Capacity is 500 -1100L/hr. and is expandable At least 75% yield of high purity water 99% reduction in salts, bacteria, particles and pyrogens Automatic rinsing cycles Low cost doubling of capacity on increased need for high purity water Feed water is softened potable water Housing is a stainless steel frame System is not to be wall mounted Pretreatment – carbon prefilter Digital conductivity of feed and permeate Display shows errors Flow meter included RS232 optional Storage tank is not included but required High purity water for exceptional cases The quality of the high purity water supplied by a reverse osmosis membrane is not sufficient when a conductivity below 1μS/cm is required. For such cases, a combination of reverse osmosis with downstream electrodionization (EDI) is needed. Results from routine usage show that such a combination with EDI technology allows product water of less than 0.1μS/cm to be obtained from 600μS/cm raw water. In addition, the continual self-regeneration of the high purity EDI mixed bed resins effects a very high microbiological purity of the water produced. Efficient performance, economical running For supplying autoclaves, washing machines and automatic analyzers when the tap water has a high salt content When ion exchanger regeneration costs are high When reliable handling of the regeneration process cannot be ensured When greater-than150L of high purity water are required daily When removal of a high percentage of bacteria, particle and pyrogen is required When a constant water quality is a necessity As central purified water system in buildings Dependable high purity water quality Thermo Scientific Barnstead reverse osmosis (RO) membranes are not only extremely effective in removing salts, but also more than 99% effective in removing incoming bacteria, particles and pyrogens. The quality rinse is a completely automatic rinsing cycle with permeate discard before and after use, as well as when not in use, to ensure constant high purity water quality. More water needed? No problem. Should your high purity water requirement increase (e.g. because of the purchase of additional glassware washers), then your system can be retrofitted to double its capacity without changing its dimensions! Saves space and cuts costs A central water treatment system replaces numerous individual systems and so not only saves space but also eliminates costs for ion exchanger regeneration etc. Compact but with room for more Ready-to-connect systems are available for mounting on a wall. Integrated pretreatment reduces loss in performance, e.g. due to suspended matter and precipitates of mineral salts or hardness formers, can easily be integrated inside the modular system cabinet. Downstream treatment measures, e.g. sterile filtration, UV disinfection and tanks, can also be mostly fitted in, according to their size. Ordering Information: This product is not available in all regions
Reverse Osmosis EDI Systems (600 – 1200L/hr)
Call for Price
A compact system with a stainless-steel frame that holds all components, Thermo Scientific™ Reverse Osmosis EDI features a microprocessor control for fully automatic control and monitoring of the system. Limiting value setting and quality rinse are standard.
Сatalog number:
07.3900-EDI
Category: Water Purification Systems
Description
Additional information
Bacterial Content |
99% |
---|---|
Capacity (Metric) |
300 to 1100 L/hr |
Feed Water Monitoring |
Yes |
Flow Rate |
800 L/hr. |
Product Water Type |
Reverse Osmosis (Type 3) |
Type |
Reverse Osmosis System |
Operating Pressure |
14 bar |
Permeate performance |
800 L/hr. |
Width (Metric) |
1400 mm |
Height (Metric) |
1800 mm |
Depth (Metric) |
600 mm |
Net Weight (Metric) |
360 kg |
Electrical Requirements |
400 V 50 Hz |
Voltage |
400 V |
Frequency |
50 Hz |
Unit Size |
Each |
Reviews (0)
Be the first to review “Reverse Osmosis EDI Systems (600 – 1200L/hr)” Cancel reply
Shipping & Delivery
Related products
Сatalog number:
062617
Double Softening System WAT
For continuous production of softened water. Thermo Scientific™ Double Softening System WAT includes a hardness sensor control that automatically regenerates resin once hardness is detected in one of the two cartridges. This ready-to-connect water softener is for softening feed water before feeding a reverse osmosis system. Water softening removes hard ions, such as calcium and magnesium, and extends the life of the reverse osmosis membrane.
Сatalog number:
50132374
Barnstead™ MicroPure™ Water Purification System
$6,429.00 – $7,126.00
Process up to 15L/day of ultra-pure water with the compact and reliable Thermo Scientific™ Barnstead™ MicroPure™ Water Purification System. This system is an outstanding choice for applications such as HPLC or other instrumental analyses, sample preparation, glassware rinsing or molecular biology work in which endotoxins and/or nucleases would interfere. Place the system without direct access to a water line with the optional integrated 6L feed water reservoir and easily view the screen with backlit tiltable display. Monitor feed water quality to help maximize cartridge life.
Сatalog number:
50157882
Barnstead™ Smart2Pure™ Pro Water Purification System
$14,420.00 – $17,461.00
Сatalog number:
LMX31
Barnstead™ RO and TII Accessories and Consumables
$160.00 – $1,267.00
Optimize your water purification system with Thermo Scientific™ Barnstead™ RO and TII Accessories and Consumables. For use with Barnstead RO and TII water purification systems, these products include filters and pre-filters, cartridges, overflow cutoff float and pump interlock cable, as well as dispensers and printer.
Сatalog number:
50132389
Barnstead™ Pacific™ RO Water Purification System
Call for Price
Сatalog number:
50132393
Barnstead™ LabTower™ TII Water Purification System
$20,978.00
Convert tap water into high-purity water with the Thermo Scientific™ Barnstead™ LabTower™ TII Water Purification System, a complete solution integrating purification and tank. This high-tech system is designed to continuously recirculate purified reservoir water to preserve water quality even during periods of inactivity. Conserve bench space with this stand-alone design which includes an integrated 100L reservoir. Castors allow for easy relocation within the lab.
Сatalog number:
D13321
Barnstead™ Easypure™ RoDi
Сatalog number:
D4642-33
Barnstead™ E-Pure™ Ultrapure Water Purification Systems
$6,064.00 – $6,349.00
Produce Type 1 ultrapure water with low operating costs using Thermo Scientific™ Barnstead™ E-Pure™ Ultrapure Water Purification Systems. Choose from a three- or four-module system. Gain longer cartridge life and benefit from lower operating costs with large cartridges. This system is Ideal for AA, GS, buffer preps, or as a purified feed water source for analytical instruments or labware washers. It is simple to use and easy to maintain.
Reviews
There are no reviews yet.