Our coverslip mini-rack is a miniature support designed to vertically hold eight standard round or square coverslips. The mini-rack fits easily into a standard 50 mL beaker and can accommodate a small stir bar beneath the rack. Use of the mini-rack eliminates the necessity for repeatedly moving coverslips between solutions with forceps. The mini-rack is handy for sequential wash steps where thorough dilution and removal of material from the coverslips is critical. The mini-rack is low-binding, withstands strong acids and bases, is not damaged by heat and may be sterilized by a variety of methods such as autoclaving, organic solvent treatment or ethylene oxide exposure. The mini-rack is easily disassembled for cleaning and storage.
Description
Additional information
Type |
Coverslip Mini-Rack |
---|---|
Volume (Metric) Working |
50 mL |
Shipping Condition |
Room Temperature |
Sterility |
Sterile |
Reviews (0)
Be the first to review “Coverslip Mini-Rack, for 8 coverslips” Cancel reply
Shipping & Delivery
Related products
Сatalog number:
C24727
CoverWell™ Imaging Chamber Gasket with Adhesive
Сatalog number:
P24742
Press-to-Seal™ Silicone Isolator with Adhesive, 24 wells, 2.5 mm diameter, 2.0 mm deep
Сatalog number:
P24745
Press-to-Seal™ Silicone Sheet with Adhesive, 13 cm x 18 cm, 0.5 mm thick
Сatalog number:
C18139
CoverWell™ Perfusion Chamber Gasket, 8 chambers, 9 mm diameter, 0.5 mm deep
Сatalog number:
155411PK
Nunc™ Lab-Tek™ Chambered Coverglass
Grow, stain and view living cells on a single device. Thermo Scientific™ Nunc™ Lab-Tek™ Chambered Coverglass with a No. 1 borosilicate glass bottom offers the optical characteristics required for high magnification and confocal image analysis. Available in 1-, 2-, 4-, and 8-well formats. The upper chamber structure cannot be removed from the coverglass.
Сatalog number:
174985
Nunc™ Thermanox™ Coverslips
Improve cell attachment and growth on coverslips with the versatile Thermo Scientific™ Nunc™ Thermanox™ Coverslips. These cell-culture treated coverslips are available in a number of shapes and sizes. The proprietary polyester material is highly resistant to solvents (e.g. xylene, acetone, acetic acid) and has a very low gas permeability. Suitable for cytostaining, mounting, embedding, or scintillation counting. Not recommended for phase contrast microscopy or techniques involving fluorescent stains.
Сatalog number:
P18179
Press-to-Seal™ Silicone Sheet, 13 cm x 18 cm, 1.0 mm thick
Сatalog number:
C24776
Reviews
There are no reviews yet.