Features: Available in 38-430 finish Natural HDPE closures are Animal Derived Component (ADC) Free Fits Nalgene PET and PETG Media Bottles with 38-430 neck finish (except 125mL PETG Media Bottles) Leakproof Guarantee when used with Nalgene PET and PETG Media Bottles Easy application and breaking of the tamper evident seal ring Gamma irradiated to provide 10 -6 Sterility Assurance Level (SAL) Flat top surface for possible printing or labeling Ordering Alerts: Closures are sterile and bulk packed. Order Nalgene PET or PETG Media Bottles with 38-430 neck finish without closures separately. The term “leakproof” applies to Thermo Scientific Nalgene products that meet the following criteria: a) Bottle/flask/funnel closure systems with closures smaller than 100mm, after they are filled with water, inverted, withstand air pressure of 2psig for 2 minutes, and no water escapes;. b) Bottle/funnel/flask closure systems of larger than 100mm after they are filled with water, inverted for 15 minutes, and no water escapes. Note: these tests, using other liquids, may not yield the same results. To ensure safe usage, customers are advised to test Thermo Scientific Nalgene bottles and closures under conditions of their planned applications. Thermo Scientific Nalgene products are leakproof at ambient temperature and pressure when used with their Nalgene closures.
Nalgene™ HDPE Tamper Evident Closures, Sterile, Bulk-Pack
Nalgene™ HDPE Tamper Evident Closures are specially designed for use with PET/PETG square media bottles.
Сatalog number:
342141-0384
Category: Bottle Caps
Description
Additional information
Closure Material |
HDPE |
---|---|
Closure Size |
38-430 mm |
For Use With (Equipment) |
Nalgene PET/PETG square media bottles (except 125mL PETG Media Bottles) |
Product Type |
Tamper Evident Closure |
Color |
Natural |
Material |
HDPE |
No. per Case |
240 |
No. per Pack |
240 |
Packaging |
Bulk |
Sterility |
SAL 10 |
Certifications/Compliance |
Manufactured in compliance with ISO 13485:2016 quality requirements |
Closure Included |
Yes |
Fit for Purpose |
Sterile |
Unit Size |
Each |
Reviews (0)
Be the first to review “Nalgene™ HDPE Tamper Evident Closures, Sterile, Bulk-Pack” Cancel reply
Shipping & Delivery
Related products
Сatalog number:
342151-0384
Nalgene™ HDPE Closures: Sterile, Bulk Pack
Сatalog number:
75003511
Sorvall™ High Performance Aluminum Cap for 1L Centrifuge Bottle, Pack of 2
Achieve performance up to 20,584 x g with the Thermo Scientific™ Sorvall™ high performance aluminum cap for 1-liter centrifuge bottles, designed for superspeed and large capacity centrifuges. This high-strength aluminum cap enhances bottle support and improves chemical resistance to Phenol solutions when compared with Noryl™ plastic caps. These caps are available for both polypropylene copolymer (PPCO) bottles, designed for excellent chemical resistance and are autoclavable, or polycarbonate (PC) bottles, which are designed for excellent clarity.
Сatalog number:
312760-0060
Nalgene™ Closures for Dropper Bottles: Bulk Pack
Сatalog number:
362150-7240
Nalgene™ Colored Polypropylene Closures with 24-415 Finish
Сatalog number:
DS2168-0384
Nalgene™ Autoclavable Septum Closure, Autoclavable, 38-430 size
Сatalog number:
312160-0530
Heat-Shrink Bands for Nalgene™ PETG Media Bottles
Ensure the integrity of bottle contents with Thermo Scientific™ Heat-Shrink Bands for Thermo Scientific™ Nalgene™ PETG Media Bottles. Simply apply the recommended application torque for Thermo Scientific Nalgene closures and slide the heat-shrink band over the closure and bottle neck. Heat the band to shrink and secure contents with a tamper-resistant seal.
Сatalog number:
362150-7384
Reviews
There are no reviews yet.