Features : Connect this conductivity sensor directly to a PLC (Programmable Logic Controller) for seamless integration with industrial control systems. Use any computer to display data, calibrate and customize the measurement without an intermediate analyzer electronics box. Sensor heads are precalibrated and can be replaced or exchanged with any other type of sensor without taking the system down. AquaSensors Conductivity/Resistivity DataStick: Provides universal conversion of sensor signals and interactive communications for measurement, calibration, configuration and diagnostics Precalibrated (no field calibration required) Plug and play sensor heads Two electrode measurement High accuracy temperature compensation Offered in a variety of materials Direct data reporting (24-bit) Conductivity Sensor Head: Precalibrated for conductivity and temperature Can be plugged into any DataStick to yield accurate 24-bit data Communications Adapter: Plugs into the DataStick to provide power and direct interactive communications with control systems AV38 Local Display/Controller: Two line display and seven key navigation Data reporting with up to two current outputs Two Form C relays Digital communications The CPVC sensor head is all purpose, low cost and ideal for use in the Conductivity/Resistivity Measurement System The PEEK sensor head is food grade, applicable to high temperatures, and also ideal for use in the Conductivity/Resistivity Measurement System Recommended for: Food processing Pharmaceutical applications Water production Reverse osmosis filters Desalination Deionization Ultrafiltration Distilled water Semiconductor power generation (steam production, condensate return, boiler blowdown, cooling towers, leak detection in heat exchangers, demineralizers)
Sold out
AquaSensors™ DataStick™ Conductivity Resistivity Sensors
Call for Price
Save time, space and money with the Thermo Scientific™ AquaSensors™ DataStick™ Conductivity Resistivity Sensors, which offer universal plug-and-play convenience as well as seamless integration with industrial control of systems.
Сatalog number:
CCPEEK
Category: Water and Wastewater Systems
Description
Additional information
Range |
0 to 5000 µS/cm; 0 to 18.2 MW·cm |
---|---|
Electrode |
Two electrode measurement with 0.01, 0.1, and 1.0 cell constants |
Max. Pressure |
150psig (at 75°C); 150psig (at 95°C) |
Type |
Conductivity Resistivity Sensors, PEEK, Conductivity Resistivity Sensors, CPVC |
For Use With (Equipment) |
AquaSensors™ DataStick™ Analytical Measurement System |
Flow Rate |
10 ft./sec. |
Resolution |
4.5 significant figures |
Temperature (Metric) Operating |
-5°C to +95°C |
Unit Size |
Each |
Reviews (0)
Be the first to review “AquaSensors™ DataStick™ Conductivity Resistivity Sensors” Cancel reply
Shipping & Delivery
Related products
Сatalog number:
ASDSORP
AquaSensors™ Datastick™ ORP Measurement System
Сatalog number:
RT1SS
AquaSensor™ DataStick™ Wide-Range Turbidity Measurement System
Call for Price
Сatalog number:
AV38BB0A1
AquaSensors™ AV38 Local Digital Monitor and Controller
Call for Price
Сatalog number:
TCPEEK
AquaSensors™ DataStick™ Toroidal Conductivity Measurement System
Call for Price
Сatalog number:
AQTC0
AquaSensors™ AquaClear™ DataStick™ Low-Level Turbidimeter
Call for Price
Сatalog number:
ASDSPH
AquaSensors™ DataStick™ pH Measurement System
Perform differential pH measurements with a precalibrated plug-and-play sensor using the Thermo Scientific™ AquaSensors™ DataStick™ pH Measurement System. A replaceable reference junction contributes to long sensor life. Direct 24-bit data reporting is done via a variety of direct-to-PLC industrial communication protocols.
Сatalog number:
COD165
Orion™ AQUAfast COD165 Thermoreactor
$1,585.00
Conduct environmental and wastewater monitoring with the Thermo Scientific™ Orion™ AQUAfast COD165 Thermoreactor. The COD165 thermoreactor is equipped with an automatic voltage selector for voltages between 90 and 260 V with a frequency of 50 or 60 Hz. Select from five preset work temperatures of 100 °C, 120 °C, 150 °C, 160 °C and 165 °C and four preset run times of 30 minutes, 60 minutes, 120 minutes or continuous time. Simply place 16mm round sample tubes into the digestor wells, cover with the hinged safety shield, set the temperature and time and let samples digest.
Сatalog number:
ASDSSLDS
Reviews
There are no reviews yet.