Features: Temperature settings for 100°C, 120°C, 150°C, 160°C and 165°C Program automatic shutoff with preset times of 30, 60, and 120 minutes or use continuous temperature mode for manual temperature control Automatic selection of voltage from 90V to 260V and frequency from 50/60Hz with appropriate power cable for US/Canada, EU and China (included) Ordering Alerts: Accessories include COD Test Kits (Range 0 to 150ppm, CODL00; Range 0 to 1500ppm, CODH00; Range 0 to 15,000ppm, CODHP0) and COD Standards (Range 1000ppm, CODS01; Range 10,000ppm, CODS10).
Orion™ AQUAfast COD165 Thermoreactor
Conduct environmental and wastewater monitoring with the Thermo Scientific™ Orion™ AQUAfast COD165 Thermoreactor. The COD165 thermoreactor is equipped with an automatic voltage selector for voltages between 90 and 260 V with a frequency of 50 or 60 Hz. Select from five preset work temperatures of 100 °C, 120 °C, 150 °C, 160 °C and 165 °C and four preset run times of 30 minutes, 60 minutes, 120 minutes or continuous time. Simply place 16mm round sample tubes into the digestor wells, cover with the hinged safety shield, set the temperature and time and let samples digest.
Description
Additional information
| Accuracy |
±0.2 end of scale % |
|---|---|
| Voltage |
100/220 V |
| Weight (English) |
127 oz. |
| Weight (Metric) |
3.6 kg |
| Frequency |
50/60 Hz |
| Heating Block Temperature Homogeneity |
±0.5°C |
| Heating Block Temperature Precision |
±0.1°C |
| Electrical Requirements |
100/220 V 50/60 Hz |
| Heating Block Temperature Stability |
±0.5°C |
| Over-Temperature Protection |
Yes |
| Safety Cover |
Clear plastic, hinged to flip up for loading and unloading |
| Sample Size |
Up to 25 Digestion Tubes, 16mm diameter |
| Temperature Probe |
Pt100 class A |
| Temperature Probe Calibration |
Automatic by software |
| Temperature Selection |
100, 120, 150, 160 or 165°C |
| Thermoregulator |
PID microprocessor |
| Wattage |
400 w |
| Type |
Monitor |
| Unit Size |
Each |
Reviews (0)
Shipping & Delivery
Related products
Сatalog number:
AQTC0
AquaSensors™ AquaClear™ DataStick™ Low-Level Turbidimeter
Сatalog number:
ASDSPH
AquaSensors™ DataStick™ pH Measurement System
Perform differential pH measurements with a precalibrated plug-and-play sensor using the Thermo Scientific™ AquaSensors™ DataStick™ pH Measurement System. A replaceable reference junction contributes to long sensor life. Direct 24-bit data reporting is done via a variety of direct-to-PLC industrial communication protocols.
Сatalog number:
OZPEEK1B
AquaSensors™ Datastick™ Dissolved Ozone Measurement System
Сatalog number:
ASDSORP
AquaSensors™ Datastick™ ORP Measurement System
Сatalog number:
RT1SS
AquaSensor™ DataStick™ Wide-Range Turbidity Measurement System
Сatalog number:
711010-9507
Nalgene™ Settlometer Jar with Cover
Nalgene™ Settlometer Jar with Cover is a replacement part in the Nalgene™ Settlometer Kit Cat# 1010-0507. The Nalgene™ Settlometer Kit is used to analyze the activated sludge process in waste water treatment plants. The 2L jar is lightweight, transparent, highly impact-resistant and has easy to read white graduations.
Сatalog number:
AV38BB0A1
AquaSensors™ AV38 Local Digital Monitor and Controller
Сatalog number:
TCPEEK
Reviews
There are no reviews yet.