Features: System achieves resistivities up to 18.2 MΩ-cm and TOC levels below 10ppb. Virgin polypropylene water pathways prevent recontamination. Recirculation pump continuously recirculates water throughout the entire system to maintain water purity and reduce the quantity of wastewater required for rinse-up. System is wall-mountable and completely assembled for easy installation. Quarter-turn quick release canisters allow for easy cartridge replacement. 0.2μm absolute final filter removes bacteria and particulates that could alter your results. Digital resistivity meter is automatically temperature-compensated to 25°C, preventing fluctuating readings due to temperature changes. Ordering Information: Optional accessories include Remote Dispenser (D8952), Low Pressure Pump Protector (D2706), and Low Water Level Pump Protector (D0603, D0606). These products, as well as replacement cartridges and consumables, are available separately. For details, contact your sales representative. Includes: Wall bracket Requires: O-rings included with cartridge pack (sold separately) Recommended for: AA, GS, buffer preps, feedwater for analytical instruments or labware washers Note: If feeding E-Pure from a storage reservoir, Low Water Pump Protector is recommended to protect pump from damage if reservoir water level falls below system requirements. Order separately (D0603 for 120V, D0606 for 240V).
Sold out
Barnstead™ GenPure™
$0.00
SureSTART™ 11 mm Crimp Caps, Level 2 High-throughput Applications
$18.56 – $1,576.85
Barnstead™ E-Pure™ Ultrapure Water Purification Systems
$0.00 – $6,349.00
Produce Type 1 ultrapure water with low operating costs using Thermo Scientific™ Barnstead™ E-Pure™ Ultrapure Water Purification Systems. Choose from a three- or four-module system. Gain longer cartridge life and benefit from lower operating costs with large cartridges. This system is Ideal for AA, GS, buffer preps, or as a purified feed water source for analytical instruments or labware washers. It is simple to use and easy to maintain.
Description
Additional information
| Certifications/Compliance |
CE, CSA |
|---|---|
| Conductivity |
0.055μS/cm, Type 1: 0.055μS/cm, Type 2: 0.067 to 0.1μS/cm |
| Bacterial Content |
<1 CFU/mL |
| Feed Water Monitoring |
No |
| Feedwater Source |
Tap or Pretreated |
| Flow Rate |
Up to 2.5 L/min. |
| Product Water Type |
Type 1 |
| Remote Dispenser |
Optional |
| Resistivity |
18.2 Mohm.cm at 25°C |
| TOC Monitor with UV Intensity Monitoring |
No |
| Total Organic Carbon |
<10 ppb |
| Type |
Water Purification System |
| Feedwater Pressure |
100 psig (6.9 bar) |
| Modules |
4, 3 |
| Particles >0.2µM/mL |
<1 μM/mL |
| Dimensions (L x W x H) |
7.5 x 37.5 x 28 in. (19 x 95.3 x 71.1 cm), 7.5 x 31.5 x 28 in. (19 x 80.0 x 71.1 cm) |
| Length (English) |
7.5 in. |
| Width (English) |
37.5 in., 31.5 in. |
| Width (Metric) |
95.3 cm, 80.0 cm |
| Height (English) |
28 in., 80.0 cm, 95.3 cm |
| Height (Metric) |
71.1 cm |
| Voltage |
240 V |
Reviews (0)
Shipping & Delivery
Related products
Сatalog number:
50155482
Reverse Osmosis Systems RO 100-350 RDS
Produce product water that is less than 0.1µS/cm. Thermo Scientific™ Reverse Osmosis RO 100-350 RDS systems features an integrated ion exchanger, storage tank and pressure pump in a dust-proof cabinet. These systems are ideal supplier of high purity water for analyzers, as well as for general laboratory purposes according to international quality-standards like CLSI. The quality of the high purity water supplied by reverse osmosis is not sufficient when a conductivity below 1μS/cm is required. For such cases, the combination of reverse osmosis with ion exchanger is necessary.
Сatalog number:
062617
Double Softening System WAT
For continuous production of softened water. Thermo Scientific™ Double Softening System WAT includes a hardness sensor control that automatically regenerates resin once hardness is detected in one of the two cartridges. This ready-to-connect water softener is for softening feed water before feeding a reverse osmosis system. Water softening removes hard ions, such as calcium and magnesium, and extends the life of the reverse osmosis membrane.
Сatalog number:
061278
Cabinet Softening System WAE
Single softening cabinet systems have time control and are specially designed for discontinuous use. Ideal for laboratory point-of-use water purification systems, the Thermo Scientific™ Cabinet Softening System WAE is ready-to-connect, and softens feed water before feeding a reverse osmosis system. By removing hard ions, such as calcium and magnesium, the softened water extends the life of the reverse osmosis membrane.
Сatalog number:
AY1406X3
Accessories for the Barnstead™ TII Type 2 Water System
Сatalog number:
50157882
Barnstead™ Smart2Pure™ Pro Water Purification System
Сatalog number:
50131217
Barnstead™ GenPure™
Produce Type 1 ultrapure water with consistent quality for your most demanding and sensitive applications with the Thermo Scientific™ Barnstead™ GenPure™ water purification system. This system offers outstanding control, as well as high-precision, USP-complying conductivity measurement with temperature compensation that can be switched on or off. All GenPure™ systems exceed international standard ASTM Type I, ISO 3696 Grade 1, ASTM D1193 and CLSI-CLRW.
Сatalog number:
50129890
Barnstead™ Smart2Pure™ Water Purification System
Convert tap water to ASTM Type 1 water with the compact, all-in-one Thermo Scientific™ Barnstead™ Smart2Pure™ Water Purification System. This complete system produces 3 or 6 liters of ultrapure water per hour. The Smart2Pure 3 and 6 feature a built-in 6L reservoir, while the Smart2Pure 12 offers the choice of a 30L or 60L reservoir for customizable storage capacity. Dispensing is easy and features variable speed to control flow. The display can be tilted for optimal reading. Position this system on the bench or mount on the wall.
Сatalog number:
50132391
Barnstead™ LabTower™ RO Water Purification System
Convert tap water into reverse osmosis (RO) water with integrated 100L storage using the Thermo Scientific™ Barnstead™ LabTower™ RO Water Purification System, which allows the user to easily read parameters with an ultra-modern controller. Mounted on casters, this compact system is an ideal pure water supply for any laboratory. The system is well-suited as a feed water source for dishwashers, autoclaves and general laboratory use. Choose from two system options with permeate flows of 20, 49 or 60L/hr. Resistivity/conductivity is clearly displayed on a large back-lit control panel that tilts for optimum viewing.
Reviews
There are no reviews yet.