Specifically designed for discontinuous use Time is required for regeneration of ion exchange media User sets electronic timer to determine when regeneration will be automatically initiated Water connections are R1 in. Ordering Information: This product is not available in all regions
Product was successfully added to quote request.View Your Quote Cart
Cabinet Softening System WAE
$0.00
Single softening cabinet systems have time control and are specially designed for discontinuous use. Ideal for laboratory point-of-use water purification systems, the Thermo Scientific™ Cabinet Softening System WAE is ready-to-connect, and softens feed water before feeding a reverse osmosis system. By removing hard ions, such as calcium and magnesium, the softened water extends the life of the reverse osmosis membrane.
Сatalog number:
061278
Category: Water Purification Systems
Description
Additional information
Capacity (Metric) |
10 m³ at 10°dH |
---|---|
Flow Rate |
2.5 L/hr. |
Type |
Water Softening System, WAE |
Salt Stock |
75 kg |
Width (Metric) |
310 mm |
Height (Metric) |
1150 mm |
Depth (Metric) |
450 mm |
Unit Size |
Each |
Reviews (0)
Be the first to review “Cabinet Softening System WAE” Cancel reply
Shipping & Delivery
Related products
Сatalog number:
50155482
Reverse Osmosis Systems RO 100-350 RDS
$0.00
Produce product water that is less than 0.1µS/cm. Thermo Scientific™ Reverse Osmosis RO 100-350 RDS systems features an integrated ion exchanger, storage tank and pressure pump in a dust-proof cabinet. These systems are ideal supplier of high purity water for analyzers, as well as for general laboratory purposes according to international quality-standards like CLSI. The quality of the high purity water supplied by reverse osmosis is not sufficient when a conductivity below 1μS/cm is required. For such cases, the combination of reverse osmosis with ion exchanger is necessary.
Сatalog number:
D14041
Barnstead™ TII Type 2 Water System
$0.00
Сatalog number:
50157375
Point of Dispense Filters for Barnstead™ Point of Use Water Purification Systems
$318.00 – $319.00
Сatalog number:
50131217
Barnstead™ GenPure™
$0.00
Produce Type 1 ultrapure water with consistent quality for your most demanding and sensitive applications with the Thermo Scientific™ Barnstead™ GenPure™ water purification system. This system offers outstanding control, as well as high-precision, USP-complying conductivity measurement with temperature compensation that can be switched on or off. All GenPure™ systems exceed international standard ASTM Type I, ISO 3696 Grade 1, ASTM D1193 and CLSI-CLRW.
Сatalog number:
50132132
Barnstead™ Pacific TII Water Purification System
$0.00 – $11,670.00
Convert tap water into Type 2, high purity water with the automatic and cost-efficient Thermo Scientific™ Barnstead™ Pacific TII Water Purification System. This system supports daily requirements from 20 to 200 liters. It removes approximately 98% of inorganic ions and 99% of all dissolved organic substances, as well as microorganisms and particles, with its high performance, reverse osmosis membrane.
Сatalog number:
50132389
Barnstead™ Pacific™ RO Water Purification System
$0.00
Сatalog number:
50146378
Dionex™ IC Pure™ Water Purification System
$0.00 – $7,345.00
The Thermo Scientific™ Dionex™ IC Pure™ water purification system brings reagent-free ion chromatography to the next level by producing ultrapure water used in the analysis of anions, cations, organic acids, carbohydrates, and amines in water samples. This system has been engineered to remove impurities that threaten your results so you can focus on what is important – the sensitivity and resolution of your ion chromatography analysis. Additionally, the Dionex IC Pure water purification system provides ultrapure water to the entire Dionex RFIC product line.
Сatalog number:
D13321
Barnstead™ Easypure™ RoDi
$0.00
Reviews
There are no reviews yet.