Single-screw extrusion Proven single-screw laboratory extruders deliver reliable data captured during the extrusion process to verify process parameters (speed, energy, temperature) for unknown materials or to manufacture smaller quantities of a new polymer (as strands, sheets, pellets, blown films) during research and development. The extruders are equipped with measuring ports for melt pressure and melt temperature to study the process parameters along the extruder barrels. These barrels are available in different lengths (length/diameter ratio). A die can be connected to the end of the extruder barrel to form the polymer melt as strand or film. Special rheological dies (slit, rod, x-die) allow the determination of shear- and elongational viscosity at defined shear rates. A variety of screw geometries to customize the extrusion process with different compression ratios, venting and mixing sections is offered. Wear-reduced screws and barrels increase the lifetime of the system. Standard feeders for pellets and special feeding systems for powders, pastes, liquids or highly viscous rubber complete the set up. Typical single-screw investigations Extrudability of newly developed materials Manufacturing homogeneous melts Manufacturing films, foils, strands and profiles for optical and mechanical testing as well as outdoor exposure tests Measuring rheological behavior (viscosity, elasticity) Testing individual and combined influences of additives (stabilizer, lubricant) and functional additives (anti-oxidation, UV-stabilizers, pigments and fillers) Foam extrusion The HAAKE Rheomex measuring extruder contains the necessary measuring, control and monitoring technology for the respective application. A new concept simplifies handling in the laboratory and enables secure operation. This is characterized by: Mobile measuring sensors avoid the necessity of handling of heavy and hot parts Integrated heating and cooling circuits reduce the number of plug connections and thus the danger of making incorrect connections Several peripheral units such as feeding and post-extrusion units are computer controllable thus meaning better reproducibility and documentation
HAAKE™ Rheomex QC lab Single Screw Extruders for the HAAKE™ PolyLab™ QC System
HAAKE™ Rheomex QC lab Single Screw Extruders for the HAAKE™ PolyLab™ QC System torque rheometer platform are focused on the analysis of rheological and processing characteristics of various materials.
Сatalog number:
567-2110
Category: Extruders
Description
Additional information
Torque Rheometer |
Yes |
---|---|
Unit Size |
Each |
Reviews (0)
Be the first to review “HAAKE™ Rheomex QC lab Single Screw Extruders for the HAAKE™ PolyLab™ QC System” Cancel reply
Shipping & Delivery
Related products
Сatalog number:
567-1040
HAAKE™ Rheomix OS Lab Mixers for the HAAKE™ PolyLab™ OS system
Сatalog number:
567-2096
HAAKE™ MiniJet Pro Piston Injection Molding System
Сatalog number:
553-0060
Energy 11 Twin-Screw Extruder
The Energy 11 Twin-Screw Extruder can be set up for a wide range of applications encountered in current battery R&D. The fully ported, horizontally split barrel allows for flexible feeding of solid and liquid ingredients. Interchangeable die designs adapt to a range of materials from dry granules, polymeric solid-state electrolytes, and electrode films to wet slurries. Eight precisely controlled temperature zones along the barrel ensure flexibility in processing.
Сatalog number:
567-2275
HAAKE™ MiniLab 3 Micro Compounder
Сatalog number:
QCMIXER
HAAKE™ Rheomix QC Lab Mixers for the HAAKE™ PolyLab™ QC System
Сatalog number:
567-2090
HAAKE™ MiniCTW Micro-Conical Twin Screw Compounder
Сatalog number:
567-2020
HAAKE™ Rheomex OS Single Screw Extruder for the HAAKE™ PolyLab™ OS system
Thermo Scientific™ HAAKE Rheomex lab single screw extruders for the HAAKE PolyLab OS torque rheometer platform are focused on the analysis of rheological and processing characteristics of various materials. With only a small sample, amount customers can simulate production processes and generate films or profiles for further testing.
Сatalog number:
10134964
HAAKE™ PolyLab™ QC Modular Torque Rheometer
Confidently meet all your quality control demands with the Thermo Scientific™ HAAKE™ PolyLab™ QC Modular Torque Rheometer. The HAAKE PolyLab QC Modular Torque Rheometer can be connected to an interchangeable mixer, single-screw extruder or conical twin-screw extruder — combining proven technology and state-of-the-art hardware and software with an easy-to-use interface.
Reviews
There are no reviews yet.