Features
- Connector A: none
- Connector B: none
- Cable: 25 ft (7.6 m)
- 8 conductor 30 gauge stranded wires with shield cable
- Teflon insulated
Cable, shielded transducer stock
$299.00
Popular electrical component
This shielded transducer stock cable has no connectors on either end. it is 25 ft (7.6 m) long. It hasĀ 8 conductor, 30 gauge stranded wires with shield cable, and it is Teflon insulated. Learn More
Description
Shipping & Delivery
Related products
Von Frey Probe
To assess mechanical allodynia, which is a painful response to a light touch or pressure from a stimulus that is not normally painful, the Electronic von Frey Anesthesiometer was developed. The Electronic von Frey meter uses one of 15 different flexible von Frey hairs called āSuperTipsā¢ā (or rigid tips up to 800 grams). Each hair, regardless of model chosen, is exactly 0.8 mm in diameter. This uniformity of design eliminates false readings and allows for comparison of test results. The Electronic von Frey can be used with chart recorders and analog/digital converters, and it never needs calibrated. This system includes either a 90, 800 or 1,000 gram probe. Mesh stands are available in a variety of sizes for large group studies.
Š”atalog number:
DRL
Dummy Load Resistor Kit
A365 can be used as a precise voltage source by placing a precision ādummyā resistor load across the output terminals. Precision resistors (such as the 100 Ī©, 1000 Ī© and 10,000Ā Ī© resistors in WPIās optional Dummy Load Resistor Kit #DRL) when placed across the output terminals convert the precision current levels to accurate voltage levels.
For example, 1 milliampere flowing through 1000 Ohms will produce 1 volt across the output terminal pair. Thus, models A365D and A365R can be used as low noise sources of accurate voltage pulses or DC. To maintain less than 1% error, avoid shunting the output dummy resistor with a load resistance less than 100 times the dummy resistance value.
Micro Nitric Oxide Sensors
TheĀ ISO-NOP007Ā has a tip diameter of just 7 microns and a length of 2mm. The response is linear over a wide dynamic concentration range of NO. The design is based on a single carbon fiber coated with WPI's NO-selective membrane. A detection limit of approximately 1 nM NO makes this electrode ideal for use in tissues and microvessels.
BNC to BNC Cable
Our BNC-to-BNC Coaxial Cables come in a variety of lengths, from 6 inches to 10 feet, and work well with our electrophysiology equipment and meters. These cables have a metal, male BNC connector on both ends of the cable. BNC (Bayonet Neill-Concelmen) connectors have a bayonet-style locking mechanism that provides a secure connection. These coaxial cables have an impedance of 50 ohms (RG58U style). The cables have excellent shielding from electromagnetic interference and radio frequency interference, which is perfect for electrophysiology laboratories. The length of your cable can affect the signal quality, so choose the shortest cable that is long enough for your application. Learn More
Š”atalog number:
5374
Low-noise cable for Microelectrode Holder, A: BNC (male), B: pin
Š”atalog number:
13685