Two mobile workstations, constructed of heavy-duty stainless steel with locking casters, integrate all your EZ-Anesthesia components into one portable unit. Open side shelves accommodate 20 lb. cylinders, and convenient 2″ port holes allow for easy rigging of gas and electrical lines. Below the work surface of each mobile workstation is an open shelf and a locking cabinet. E-25000 provides a 42″x24″ work surface and holds up to four cylinders. E-27000 has a 22″x21″ work surface and holds up to two cylinders. These systems are easy to set up and provide maximum flexibility and mobility.
Mobile Workstation, 22″ x 21″ top
For use with EZ Anesthesia Systems.
Сatalog number:
EZ-E27000
Categories: Anesthesia Accessories, Anesthesia Systems, Instruments/Platform
Related products
Connector, adapts WPI Transducers to non-WPI equipment
Сatalog number:
CPVC4050G
Carbon, 18 AWG, green
Сatalog number:
DRL
Dummy Load Resistor Kit
A365 can be used as a precise voltage source by placing a precision “dummy” resistor load across the output terminals. Precision resistors (such as the 100 Ω, 1000 Ω and 10,000 Ω resistors in WPI’s optional Dummy Load Resistor Kit #DRL) when placed across the output terminals convert the precision current levels to accurate voltage levels.
For example, 1 milliampere flowing through 1000 Ohms will produce 1 volt across the output terminal pair. Thus, models A365D and A365R can be used as low noise sources of accurate voltage pulses or DC. To maintain less than 1% error, avoid shunting the output dummy resistor with a load resistance less than 100 times the dummy resistance value.
Сatalog number:
EZ-7000
Classic Small Animal Anesthesia System
Complete small animal anesthesia system and all the accessories
EZ Anesthesia is the system of choice for anesthetizing small animals, and it comes with a variety of choices. Animals to be anesthetized are placed in the acrylic induction chamber, and the system delivers a precisely blended mixture of oxygen and isoflurane. An activated charcoal air filter canister at the top of the chamber releases safe, filtered air back into the room. A water-heated cage warmer or warming plate (ATC2000) is used to retain the animal body temperature while in the induction chamber. After the initial anesthetizing, the animal may be moved to the heated surgical water bed and positioned properly in the snugly fitted nose cone. A highly sensitive valve regulated by the animal’s breathing works with the nose cone to ensure non-rebreathing efficiency. It allows safe anesthesia for up to several hours. The breathing device also includes an air filter that releases safe, filtered air back into the room.Euthanex Lid Gaskets
Сatalog number:
5374