Features
- Innovative 3-step charger employs fast, medium, and trickle charges
- Charges at a safe, low current, greatly extending battery life
- For use only with batteries in A385 Stimulus Isolator
Dummy Load Resistor Kit
$156.00
Single Channel Pulse Generator
$3,602.00 – $4,147.00
BATTERY CHARGER
$855.00
An innovative three-step charger, A382 employs fast, medium, and trickle charges at a safe, low current, greatly extending battery life. After a fast initial phase, the charger automatically switches to a constant voltage mode. When charging is complete, the charger switches to the trickle-charge mode. LED lamps indicate charging status. (For use only in charging batteries installed in the A385.)
Description
Shipping & Delivery
Related products
PLANTAR TEST/TAIL FLICK METER FOR RAT AND MOUSE
This unit, which is designed for testing narcotics and strong non-narcotic drugs, offers both Plantar (Hargreaves Method) and Tail Flick testing with a single unit. Either testing system is also available individually. In plantar mode, the visible light/heat source is directed at the paw or other desired body part, and in tail flick mode it is directed at the subjects’ tails. Test up to 12 mice or 6 rats simultaneously. If desired, other animals like cats and rabbits may also be used. Tests are simple to setup. The focused, radiant heat/light source creates a 4 x 6 mm intense spot. Because the light is visible, you know when the test starts and ends. The equipment is silent (no whining or clicking sounds) to avoid triggering an automatic response in conditioned animals. You can set a humane cutoff timer that automatically shuts off the heat if no response is observed during the designated time frame.
Сatalog number:
300102
Adapter Extension, Connector B: 0.31 mm socket
Single Channel Pulse Generator
The A310 pulse generator/stimulator combines the reproducibility and accuracy of digital electronics with the fine resolution and continuous adjustment posÂsiÂble with analog circuitry. All timing paÂramÂeÂters are entered with high resolution, ten-turn poÂtenÂtiÂomÂeÂters and six-position range switches. Timing is acÂcuÂrate to within 1% of the set value.
Tidas-E Base Series Photo Diode Array Spectrometer
WPI’s Tidas series is a high end fiber-optic spectrometer module designed for low noise applications. The Tidas series outperforms conventional bench-based spectrophotometers and CCD-based spectrometer modules, when it comes to high precision fiber optic sampling. It relies on a monolithic optical bench made by Zeiss, which is optimized for fiber optic applications. Most cuvette-based standard spectrometers lose more than 90% of light through expensive prism decoupling. The Tidas series is designed for fiber optic sampling cells. Using suitable light sources and sample cells, spectral detection in the wavelength range of 190 to 1100 nm can be performed at noise levels < 0.04 mAU peak to peak.
Сatalog number:
5373
Low-Noise Cable for Microelectrode Holder, A: pin/jack, B: pin/jack
Сatalog number:
13685